Signal 2 m Pulse - MapleSim Help

Signal2m Pulse

Generic control of 2m pulse rectifiers

 Description The Signal 2m Pulse component General information about controllers is summarized in Control modelica://Modelica.Electrical.PowerConverters.ACDC.Control .

Connections

 Name Description Modelica ID $\mathrm{firingAngle}$ Firing angle (rad) firingAngle ${\mathrm{fire}}_{p}$ fire_p ${\mathrm{fire}}_{n}$ fire_n $v$ Voltages v

Parameters

General Parameters

 Name Default Units Description Modelica ID $m$ $3$ Number of phases m Use Constant Firing Angle $\mathrm{true}$ True (checked) means use constant firing angle instead of signal input useConstantFiringAngle Constant Firing Angle $0$ $\mathrm{rad}$ Firing angle constantFiringAngle Firing Angle Max. $\mathrm{\pi }$ $\mathrm{rad}$ Maximum firing angle firingAngleMax

Filter Parameters

 Name Default Units Description Modelica ID Use Filter $\mathrm{true}$ True (checked) means enable use of filter useFilter f $50$ $\mathrm{Hz}$ Frequency f ${f}_{\mathrm{cut}}$ $2f$ $\mathrm{Hz}$ Cut off frequency of filter fCut ${v}_{\mathrm{start}}$ $\mathrm{zeros}\left(m\right)$ $V$ Start voltage of filter output vStart

 Modelica Standard Library The component described in this topic is from the Modelica Standard Library. To view the original documentation, which includes author and copyright information, click here.