Applications, Examples, and Math Apps - Maple Programming Help

Online Help

All Products    Maple    MapleSim


Home : Support : Online Help : System : Information : Updates : Maple 2017 : updates/Maple2017/Applications

Applications, Examples, and Math Apps

New Examples & Applications

• 

applications/AntennaArray: Calculate the array factor and directivity for a uniform linear antenna array.

• 

applications/AmplifierGain: Plot the gain of an amplifier circuit for both ideal and non-ideal response.

• 

applications/AmplifierGainApp: Plot the gain of an amplifier circuit for both ideal and non-ideal response using sliders and input fields.

• 

applications/BandpassFilter: Investigate the frequency response for a Bandpass filter.

• 

applications/BeamDistributedPointLoad: Derive an expression for the deflection of a beam with a distributed load and a point load.

• 

applications/BinaryDistillation: Find the required number of stages for separating two liquid components by using the McCabe-Thiele method.

• 

applications/BoltGroupCoefficient: Calculate the bolt coefficient for eccentrically loaded bolt groups.

• 

applications/ChemicalKineticsParameterEstimation: Estimate the rate parameters for a reversible chemical reaction.

• 

applications/CountercurrentHeatExchanger: Model the temperature dynamics of a countercurrent double-pipe heat exchanger.

• 

applications/EconomicPipeSizing: Minimize the total cost of pipework across the lifetime of a plant.

• 

applications/FilteringAudioApp: Apply filters to a WAV file.

• 

applications/FitHeadFlowRateData: Fit head-flow rate data to a pump curve.

• 

applications/FuelPod: Optimize the design of a fuel pod.

• 

applications/GasOrifice: Calculate the flow rate through a large-diameter orifice.

• 

applications/InteractingTanks: Model liquid flow between three tanks connected by two pipes.

• 

applications/InvertedPendulum: Simulate the dynamics of an inverted pendulum on a cart.

• 

applications/MaxFlowRatePartiallyFilledPipe: Find the maximum flow rate in a partially filled circular pipe.

• 

applications/MaxPressureSurge: Find the excess pressure generated by water hammer due to instantaneous valve closure.

• 

applications/MOSFETParameterEstimation: Estimate the KP and VTO SPICE parameters for an n-channel enhancement mode MOSFET.

• 

applications/PumpPower: Calculate the pump power for flow between two reservoirs.

• 

applications/PyramidalHorn: Calculate the optimum design parameters for an X-band pyramidal horn.

• 

applications/RobotArm: Model a robot arm with three degrees of freedom.

• 

applications/SettlingVelocity: Find the terminal velocity of a particle settling in a fluid.

• 

applications/SimplySupportedBeam: Perform a design analysis on a simply supported beam with torsional loading.

• 

applications/ThreeReservoirProblem: Calculate the flow rates, flow directions, and head at the common junction connecting three reservoirs.

• 

applications/TunedMassDamper: Find the optimum spring and damping constant for a tuned mass damper.

• 

applications/VehicleRide: Analyze vehicle ride and handling.

• 

applications/WaveHeight: Fit wave height data to a probability distribution.

• 

examples/DataSets/BubblePlot: Visualize multiple data sets using BubblePlot.

• 

examples/DataSets/Choropleth/CustomData: Example of visualizing custom data using choropleth maps.

• 

examples/SteadyStateMarkovChain: Compute the steady-state vector of a Markov chain.

• 

examples/SuitcaseModel: Model a two-wheeled suitcase using delay differential equations.

• 

examples/SimpleUnits: Use units in the Simple Units environment.

• 

MathApps/WorldMapProjections: Explore various world map projections.

 

For more applications and examples, see the Examples and Applications Index.