CreateModel : create a MapleSim model from a Modelica file

You must first link to a MapleSim model using the following command before using the MapleSim API commands:

LinkModel: link to a MapleSim Model

The following MapleSim API commands are available:

ApplySubstitutions: apply variable and parameter substitutions

DeleteAttachment: delete the attachment of the linked MapleSim model

GetAttachment: get the Attachment of Linked MapleSim Model

GetCompiledProc: compile the Subsystem of the Linked MapleSim Model into a C Function

GetEquations: get the equations of the active subsystem

GetICs: get the initial conditions of the active subsystem

GetModel: get a linked MapleSim model filename

GetModelica: get the Modelica description of the active subsystem

GetMultibody: get a module containing the multibody portion of the active MapleSim subsystem

GetParameters: get the parameters of the active subsystem

GetPorts: get the signal ports of the active subsystem

GetSettings: get the settings of Linked MapleSim model

GetSubstitutions: get the variable and parameter substitutions defined for the model

GetSubsystemName: get the active subsystem name

GetVariables: get the variables defined for the active subsystem

ListAttachments: list the Attachments of the Linked MapleSim Model

ListSubsystems: list the subsystems defined in a linked model

SetAttachment: set the Attachment to the Linked MapleSim Model

SetComponent: create a component from Modelica source

SetModel: set a linked MapleSim model

SetParameters: set the parameters of the active subsystem

SetSubstitutions: store a set of variable and parameter substitutions with the model

SetSubsystemName: set the active subsystem name

ShowResultsManager: show the Results Manager

Simulate: simulate the Linked MapleSim Model

Tools: subpackage of commands used to generate Modelica models from within Maple

The following MapleSim Multibody API commands are deprecated:

MapleSim[Multibody][BuildEQs(deprecated)]: generate the governing equations of a multibody system

MapleSim[Multibody][GetMultibodyInput(deprecated)]: generate a description for the multibody portion of a MapleSim model

For more information on the kinematic and dynamic exports of a multibody system, see the dynamic exports and kinematic exports help pages.