Quasistationary Multiphase Ideal Closing Switch - MapleSim Help

Quasistationary Multiphase Ideal Closing Switch

Multiphase ideal closer

 Description The Quasistationary Multiphase Ideal Closing Switch (or Ideal Closing Switch) component contain $m$ quasistationary single-phase ideal closing switch models, each connected between corresponding phases of ${\mathrm{plug}}_{p}$ and ${\mathrm{plug}}_{n}$, with the control from the corresponding signal in the $\mathrm{control}$ vector input. A vector of optional thermal ports, one for each switch, is enabled if Use Heat Port is true. This switch is only intended to be used for structural changes, not fast switching sequences, due to the quasistationary formulation.

Connections

 Name Description Modelica ID ${\mathrm{plug}}_{p}$ Positive quasistationary multiphase plug plug_p ${\mathrm{plug}}_{n}$ Negative quasistationary multiphase plug plug_n $\mathrm{control}$ Boolean vector input control $\mathrm{Heat Port}$ heatPort

Parameters

 Name Default Units Description Modelica ID $m$ $3$ Number of phases m ${R}_{\mathrm{on}}$ * $1·{10}^{-5}$ $\mathrm{\Omega }$ Closed switch resistance Ron ${G}_{\mathrm{off}}$ * FLOATE(1,-5) $S$ Opened switch conductance Goff Use Heat Port $\mathrm{false}$ True means all HeatPorts are enabled useHeatPort

* Starred values are vector parameters; the default is $\mathrm{fill}\left(x,m\right)$, which creates a vector with $m$ entries of $x$.

Constant Parameters

 Name Default Units Description Modelica ID $T$ $\mathrm{fill}\left(293.15,m\right)$ $K$ Fixed device temperatures if Use Heat Port is false T

 Modelica Standard Library The component described in this topic is from the Modelica Standard Library. To view the original documentation, which includes author and copyright information, click here.