Voltage Bridge 2 Pulse - MapleSim Help

Voltage Bridge 2-Pulse

Control of 2 pulse bridge rectifier

 Description The Voltage Bridge 2 Pulse component has two boolean outputs, ${\mathrm{fire}}_{p}$ and ${\mathrm{fire}}_{n}$, that can control the gates of a Thyristor Bridge to rectify a sinusoidal voltage waveform. In a thyristor bridge, ${\mathrm{fire}}_{p}$ controls the thyristors that conduct when the input voltage, ${\mathrm{ac}}_{p}-{\mathrm{ac}}_{n}$, is positive, ${\mathrm{fire}}_{n}$ controls the thyristors that conduct when the input voltage is negative.

Connections

 Name Description Modelica ID $\mathrm{firingAngle}$ Conditional real input; firing angle (rad) firingAngle ${\mathrm{ac}}_{p}$ Positive voltage sense ac_p ${\mathrm{ac}}_{n}$ Negative voltage sense ac_n ${\mathrm{fire}}_{p}$ Boolean output fire_p ${\mathrm{fire}}_{n}$ Boolean output fire_n

Parameters

General Parameters

 Name Default Units Description Modelica ID f $50$ $\mathrm{Hz}$ Frequency f Use Constant Firing Angle $\mathrm{true}$ True (checked) means use constant firing angle instead of signal input useConstantFiringAngle Constant Firing Angle $0$ $\mathrm{rad}$ Firing angle constantFiringAngle Firing Angle Max. $\mathrm{\pi }$ $\mathrm{rad}$ Maximum firing angle firingAngleMax

Filter Parameters

 Name Default Units Description Modelica ID Use Filter $\mathrm{true}$ True (checked) means enable use of filter useFilter ${f}_{\mathrm{cut}}$ $2f$ $\mathrm{Hz}$ Cut off frequency of filter fCut ${v}_{\mathrm{start}}$ $0$ $V$ Start voltage of filter output vStart

 Modelica Standard Library The component described in this topic is from the Modelica Standard Library. To view the original documentation, which includes author and copyright information, click here.